Volvo VOE14571141 Main Hydraulic Pump for EC210B Excavators

VOE14571141 identifies a main hydraulic pump reference for the Volvo EC210B crawler excavator. Engine-driven, it supplies hydraulic flow to the implement, swing and travel circuits. Because configurations can vary by serial range, VTS checks the original nameplate and interfaces before defining the available supply option, condition and assembly scope.

VOE14571141 is the reference part number for identification and fitment review, while Volvo identifies the equipment application. It does not make every quoted unit a genuine Volvo part; the quotation identifies the supplied brand, condition, assembly scope and included components.

The application references for this page are the Volvo EC200B and EC210B crawler excavators. Final fitment must still be checked against the machine serial number and original pump configuration. Please provide:

● Complete machine serial number

● Original pump nameplate

● Clear drive shaft or spline photos

● Mounting flange photos

● Hydraulic port photos showing size, position and direction

● Regulator and external control configuration photos

Fitment must be confirmed using the complete machine serial number, original pump nameplate and interface configuration. Do not order by appearance or reference part number alone.

Similar-looking main pumps may still differ in drive shaft or spline configuration, mounting flange, hydraulic-port size and direction, regulator or control arrangement, rotation direction, internal displacement or calibration, and attached components. These points affect installation and hydraulic-system operation, so VTS compares the interfaces and original identification before confirming a supply option. Verified technical details for the selected unit will be confirmed with the quotation.

According to customer requirements and current sourcing conditions, potential solutions may include a verified genuine option when available, a branded replacement, an aftermarket replacement, a remanufactured unit or a used unit. Availability is confirmed for each enquiry.

The quotation will confirm:

● Actual supplied brand and product condition

● Whether the supply is a bare pump, a pump with regulator or the complete visible assembly

● Included and excluded components

● Required quantity

● Warranty terms for the selected option

● Lead time for the quoted supply

● Match the machine serial number and original pump nameplate with the quotation record.

● Compare the drive shaft, mounting flange, hydraulic-port layout and regulator configuration.

● Confirm the required assembly scope and every included component before payment.

● Investigate the cause of the previous failure, including suction restriction, air entry, pilot-pressure faults, contamination, regulator problems and leakage elsewhere in the circuit.

● Plan system cleaning, relevant filter replacement, suction and cooling-path inspection, correct pre-filling and lubrication to prevent dry start.

A main hydraulic pump is heavy and contamination-sensitive. Open ports are sealed against dust and moisture, while the drive shaft, mounting face, regulator and exposed controls receive impact protection. The pump is supported so transport loads do not act on the shaft or ports, with packing selected for the agreed shipping method. It may be consolidated with other confirmed excavator parts while remaining separately secured. The shipping method, freight and estimated transit time will be confirmed according to the quantity, packed dimensions, weight and destination.

Warranty terms depend on the selected supply option and will be stated in the formal quotation. Before payment, the quotation will confirm the reference part number, supplied brand, product condition, assembly scope, included components, quantity, warranty terms, lead time, Incoterms and payment terms. Actual product photos can be provided before shipment.

How is fitment confirmed?

VTS reviews the complete EC210B serial number, original pump nameplate and clear photos of the drive shaft, mounting flange, hydraulic ports and regulator configuration.

Does the quotation include the regulator?

The quotation will state whether the offer is for a bare pump, a pump with regulator or the complete visible assembly. A regulator shown in a reference image is included only when listed in the quotation.

Can a similar-looking pump be used?

Not on appearance alone. Similar housings can contain different drive, mounting, port, rotation, control and internal configurations.

Does slow hydraulic operation prove pump failure?

No. Suction restriction, air entering the system, pilot-pressure faults, regulator problems, relief settings, main-valve leakage and actuator leakage can produce similar symptoms.

Can it ship with other parts?

Yes, confirmed excavator parts can be consolidated where practical. The pump remains independently supported, sealed and protected as a heavy hydraulic component.

What is confirmed in the quotation?

The quotation identifies the supplied brand, product condition, assembly scope, included and excluded components, quantity, warranty terms, lead time, Incoterms and payment terms.

Send the EC210B or EC200B serial number, original pump nameplate and clear interface photos to VTS for fitment review and a VOE14571141 quotation.