803007141 Main Hydraulic Pump for XCMG XE215C Excavators

803007141 identifies the main hydraulic pump used as an application reference for the XCMG XE215C crawler excavator. Driven through the engine coupling, the pump supplies oil flow for the implement, swing and travel circuits. Pump housings can look similar while the shaft, mounting face, ports and regulator arrangement differ, so VTS reviews the machine serial number, old-pump identification and interface photos before defining the offered configuration.

● Replacement after pump wear or damage has been separated from suction, cooling and control-system faults

● Planned XE215C hydraulic overhaul with hoses, filters or valve-related parts ordered in the same project

● Distributor quotations that require the pump condition and assembly scope to be stated in writing

803007141 is the reference part number used to identify and review this product. XCMG identifies the equipment application and does not automatically define the brand of every quoted unit. The formal quotation will state the supplied brand, condition, assembly scope, and included or excluded components.

The main application reference for this page is the XCMG XE215C crawler excavator. Final fitment must still be checked against the complete machine serial number, old-part identification and interface configuration. Do not order by appearance or reference part number alone.

● Complete machine serial number and machine ID plate

● Original pump nameplate and all visible identification markings

● Drive shaft or coupling profile

● Mounting flange and bolt-hole pattern

● Suction, delivery, drain and pilot-port layout

● Regulator, proportional-control and attached gear-pump configuration

Main hydraulic pumps with similar housings may differ in drive-shaft or spline configuration, mounting flange, port size and direction, regulator arrangement and attached pump sections. Compare these features with the removed pump and machine installation. Appearance or the reference part number alone cannot confirm the interfaces or supply scope.

A verified genuine option may be available when confirmed. Branded or aftermarket replacements and other supply options appropriate to this product may be discussed according to the enquiry. Final availability and supply identity are confirmed in the formal quotation.

● Actual supplied brand and product condition

● Exact supply scope and included or excluded components

● Order quantity, applicable warranty terms and lead time

● Packing, Incoterms and payment terms

● Compare the drive shaft, flange, ports, regulator and attached pump sections with the removed pump.

● Confirm whether the quotation covers the pump body only or includes external controls and auxiliary sections.

● Before replacement, check suction restriction, air ingress, pilot or relief control and internal leakage elsewhere in the hydraulic system.

● Clean the tank and affected circuits, renew applicable filters, verify suction and cooling paths and prefill the pump according to the service procedure to prevent dry start.

Packaging will be selected according to the confirmed product configuration and shipping method. Open hydraulic ports, the drive shaft, mounting flange, regulator and external controls will be protected as applicable, and the heavy pump will be supported and secured for the selected route.

The shipping method, freight and estimated transit time will be confirmed according to the quantity, packed dimensions, weight and destination

Warranty terms depend on the selected supply option and will be stated in the formal quotation. Before payment, the quotation will confirm the reference part number, supplied brand, product condition, assembly scope, included components, quantity, warranty terms, lead time, Incoterms and payment terms. Actual pre-shipment photos can be provided.

Based in Xuzhou, China, VTS focuses on construction machinery parts supply and fitment support for international buyers.

● Fitment support focuses on the shaft, flange, port layout, regulator and attached pump sections.

● The quotation distinguishes the supplied brand, product condition, included components and supply scope.

● Confirmed XE215C parts can be consolidated, with international shipping coordinated for the actual order.

How do I confirm 803007141 for an XE215C?

Send the complete serial number, old-pump nameplate and clear shaft, flange, port and regulator photos.

Is the regulator included?

Only when it is listed in the quotation. The offer will distinguish the bare pump from a pump with regulator or a wider assembly.

Can the pump be ordered from the part number alone?

The number starts the review, but production variations make the old identification and interfaces necessary.

Does weak hydraulic performance always mean pump failure?

No. Suction restriction, pilot faults, relief settings, contamination and leakage elsewhere can produce similar symptoms.

What should be cleaned before installation?

The tank and affected circuits should be cleaned, applicable filters renewed, and suction and cooling paths checked.

Can it ship with other XE215C parts?

Yes, when practical. The pump remains separately sealed, supported and protected inside the consolidated shipment.

Send the complete XE215C machine serial number, old-unit nameplate and key interface photos for a 803007141 main hydraulic pump fitment review and quotation.